EFI Total Package, Easy Street, 600HP, 1970-72 Chevelle, Gold Finish

All-Inclusive Fuel Injection Kit

Designed to give optimal fuel efficiency and control

FiTech recognizes that not everyone has a 600-hp engine and some do. That is where the Street Series comes in with 3 levels of systems for your EFI needs. The Go Street EFI is a ready-to-run system that sticks to the basic functions necessary to get the best performance and economy out of your street and mild performance engine. This throttle body system is economically priced and delivers the benefits of quick starts, smooth idle and self-learning technology to get you from sea level to over the mountains without a hitch. The system easily installs with most ignition systems and fits most intake patterns to replace your old carb. The next step in our line of Street Series EFI systems is for engines producing 200-600 horsepower that is normally aspirated. With a classic gold finish, this Easy Street system may have the looks of a factory carb, but the similarities end there. The pre-programmed assembly bolts right in place on a square-bore intake manifold and requires only a minimum of inputs to fire up. The Easy Street accepts the tach signal from the coil negative, an HEI distributor or from a CD ignition box for simple installation. A fast reacting wide-band O2 sensor is supplied to monitor the fuel burn signaling the self-learning technology of the ECU on adjustments to the mixture resulting in smooth performance from idle to high rpm. Rounding out the Street Series is the Meanstreet system. The Meanstreet’s annular swirl, wet flow technology provides the most complete fuel atomization available. Using FiTech’s proprietary self-tuning technology, combined with easy tuning of steps with the supplied handheld monitor, you’ll have your high powered engine tuned and ready for the street or track. The matte black throttle body bolts to any 4-barrell intake and wiring is kept at an absolute minimum thanks to the built-in ECU. All base systems include: Handheld controller, windshield mount, WB02 sensor, bung kit, coolant sensor, gasket and mini USB cable. Master kits include the above plus: •FiTech EFI Kit with Inline Pump Kit This kit is supplied with our heavy duty, 255 LPH, external fuel pump that is suitable to support engines producing up to 650 horsepower. This kit includes 40 feet of high pressure fuel hose, two fuel filters including a serviceable 10-micron filter, fittings, mounts and clamps. •FiTech EFI Kit with Force Fuel System The new Force Fuel System mounts under the hood and uses the stock fuel pump to supply fuel to the reservoir. Inside is an efficient 340 LPH electric pump that produces the high pressure required of the EFI system. This kit is supplied with the reservoir assembly and includes a built-in pressure regulator, 5-feet of high pressure hose, -6AN fittings and an efficient 10-micron serviceable fuel filter. •FiTech EFI Kit with In-Tank Pump Module The Go Fuel In-Tank Pump Module is a universal design that allows you to install an electric fuel pump into most gas tanks. The assembly can be used on tanks ranging from 6”-15” in depth and is supplied with a 340 LPH pump. The inlet and outlet are machined to accept ORB -6AN fittings and a vent outlet is provided on the opposite side for a compact, easy to plumb system. Two different size filter/socks are included along with the installation hardware,

INCLUDES: 1 BAR internal MAP sensor, (4) Flow matched injectors, (1) Fan control, Built-in pressure regulator, Carb Studs, Air Cleaner Reducer(5/16 to 1/4), 1" Throttle Bushing Throttle Body Contents: (1) O2 Bung Kit, (1) o2 Sensor, (1) Hand-held Controller w/Cable, (1) CTS Sensor & Adapter, (1) Windshield Mount, (1) Mini USB cable, (1) 4+2 Pin Connector, (1) Return Plug, (1) Gasket Kit Fuel System Contents: 40ft Natural stainless steel braided hose, (3) 90 degree -6 fittings, (3) 45 degree -6 AN fittings, (6) Straight -6 AN fittings, 10 micron fuel filter & inline check valve. Fuel tank is baffled with an extra large 4.8 liter dual tube baffled fuel tray to prevent fuel starvation.